Wood

Found a listing on craigslist for a supplier out of Parma that offered a full cord of wood with free delivery within 10 miles for $180. Called yesterday and he dropped it off last night. Will be stacking it today.

wood

 

Stacked the new wood and moved my old pile to the backyard to make room.

IMG_20150620_173210907

 

New stack

IMG_20150619_185138502

Roofing

Things your roofing estimator may ask you but makes absolutely no sense:

– What do you expect out of your new roof?

– What do you think a roof should cost?

– How long do you plan on living here?

 

I would think I expect the roof to keep the wet stuff out of my house, like maybe snow and rain. I think the roof should cost the amount of materials plus labor and a percentage for your overhead. Plans change, figure I want the roof to last as long as possible so I do not incur any additional expenses or damages caused by leaks. The only reason I can think of for you asking this is you want to install a inferior product or do a sloppy job cause I won’t care since I am moving soon. You should also not then start talking about how the “other guys” do things. Also probably not say you cannot quote a job when that is the purpose of your visit and that it is somehow ridiculous for me to expect this out of you. Also not sure how the type of siding I have or if my roof is a normal roof applies and why you did not bother to look for yourself when you exited your vehicle and walked up to my house. Also, if you cannot give me a quote, then how can you figure this is a 15k job because of installing soffit venting. Soffit vents cost as little as $2 up to $10 for a full vinly soffit. Even figuring labor, that cost should be very minor.

Here is how I would estimate it.

Step 1, measure. This is what I did and was very generous with my rounding and waste. I came up with 16 squares.

Shingles – $150 per square

Not going with the cheap stuff

Poly Roofing paper – $50 per roll, need about 8 rolls, $400.

Ice guard, $80 per roll, I estimate about 5 rolls, but lets add another just in case, $500.

Drip edge, $75 should cover it.

Flashing, $50 nothing fancy here.

Roof nails, $100 should cover it.

Soffits, I used Owens Corning estimator and they said I needed about 174 square inches intake, which is about 8 vents, so lets figure another $100.

Ridge vent, $700

Labor, this is where I am guessing since I am not a roofer, but lets say 4 guys times 2 days at 10 hours per day, $50 per hour – $4000

Total – $8325

It was not really worth my time to have you come back to go over in detail how you could explain your $15k roofing guess when you never took out a tape measure. I don’t know why it would take longer than an hour to give me an estimate, but you took an hour just talking non-sense. This is after all what you do for a living.

 

Basement

Started working on finishing my basement. Currently building a wall towards the back of the basement for built in storage. Also bought a new tool which works very well. Duo-Fast powder actuated nailer for attaching the base plates to the concrete.

 

IMG_20150221_155708377 IMG_20150221_155753254

Framing

IMG_20150221_155610386_HDR IMG_20150221_155618812_HDR IMG_20150221_155656357 IMG_20150221_155643429_HDR IMG_20150221_155637247_HDR IMG_20150221_155629300_HDR IMG_20150221_155623971 IMG_20150221_200854073

 

Green board. Mold resistent drywall.

IMG_20150221_200835859 IMG_20150221_200829883

It is currently all muded and has a couple coats of primer.